4 files changed, 0 insertions, 98 deletions
diff --git a/Mussel/examples/voting_from_EddystoneTLM/Beacon_Scanner.md b/Mussel/examples/voting_from_EddystoneTLM/Beacon_Scanner.md
deleted file mode 100644
index 34101fe..0000000
--- a/Mussel/examples/voting_from_EddystoneTLM/Beacon_Scanner.md
+++ /dev/null
@@ -1,9 +0,0 @@
-## BLE Beacon Scanner
-
-Initiates a BLE device scan.
-Checks if the discovered devices are
-- an iBeacon
-- an Eddystone TLM beacon
-- an Eddystone URL beacon
-
-and sends the decoded beacon information over Serial log
diff --git a/Mussel/examples/voting_from_EddystoneTLM/ci.json b/Mussel/examples/voting_from_EddystoneTLM/ci.json
deleted file mode 100644
index abe13a7..0000000
--- a/Mussel/examples/voting_from_EddystoneTLM/ci.json
+++ /dev/null
@@ -1,6 +0,0 @@
-{
-  "fqbn_append": "PartitionScheme=huge_app",
-  "requires": [
-    "CONFIG_SOC_BLE_SUPPORTED=y"
-  ]
-}
diff --git a/Mussel/examples/voting_from_EddystoneTLM/voting_from_EddystoneTLM.ino b/Mussel/examples/voting_from_EddystoneTLM/voting_from_EddystoneTLM.ino
deleted file mode 100644
index 25c4720..0000000
--- a/Mussel/examples/voting_from_EddystoneTLM/voting_from_EddystoneTLM.ino
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
-   Based on Neil Kolban example for IDF: https://github.com/nkolban/esp32-snippets/blob/master/cpp_utils/tests/BLE%20Tests/SampleScan.cpp
-   Ported to Arduino ESP32 by Evandro Copercini
-   Changed to a beacon scanner to report iBeacon, EddystoneURL and EddystoneTLM beacons by beegee-tokyo
-   Upgraded Eddystone part by Tomas Pilny on Feb 20, 2023
-*/
-
-#include <Mussel.h>
-#include <Arduino.h>
-
-#include <BLEDevice.h>
-#include <BLEScan.h>
-#include <BLEAdvertisedDevice.h>
-#include <BLEEddystoneTLM.h>
-#include <BLEBeacon.h>
-
-Mussel mussel(10);
-
-int scanTime = 1;  //In seconds
-BLEScan *pBLEScan;
-
-class MyAdvertisedDeviceCallbacks : public BLEAdvertisedDeviceCallbacks {
-  void onResult(BLEAdvertisedDevice advertisedDevice) {
-    if (advertisedDevice.haveName()
-      && advertisedDevice.getFrameType() == BLE_EDDYSTONE_TLM_FRAME
-    ) {
-      BLEEddystoneTLM EddystoneTLM(&advertisedDevice);
-      mussel.push(
-        advertisedDevice.getName(),
-        millis(),
-        EddystoneTLM.getTemp()
-      );
-    }
-  }
-};
-
-void setup() {
-  Serial.begin(115200);
-  mussel.begin();
-
-  BLEDevice::init("");
-  pBLEScan = BLEDevice::getScan();  //create new scan
-  pBLEScan->setAdvertisedDeviceCallbacks(new MyAdvertisedDeviceCallbacks());
-  pBLEScan->setActiveScan(true);  //active scan uses more power, but get results faster
-  pBLEScan->setInterval(100);
-  pBLEScan->setWindow(99);  // less or equal setInterval value
-}
-
-void loop() {
-  // put your main code here, to run repeatedly:
-  BLEScanResults *foundDevices = pBLEScan->start(scanTime, false);
-  pBLEScan->clearResults();  // delete results fromBLEScan buffer to release memory
-  mussel.printStack();
-  delay(500);
-}
diff --git a/Mussel/examples/voting_from_EddystoneTLM/voting_from_EddystoneTLM.puml b/Mussel/examples/voting_from_EddystoneTLM/voting_from_EddystoneTLM.puml
deleted file mode 100644
index caafc05..0000000
--- a/Mussel/examples/voting_from_EddystoneTLM/voting_from_EddystoneTLM.puml
+++ /dev/null
@@ -1,28 +0,0 @@
-@startuml
-'start
-:instantiate mussel object;
-:instantiate bluetooth object;
-group init
-:setup mussel voting;
-:setup bluetooth scanner;
-end group
-split
-while (each beacon detected)
-group "bluetooth callback" {
-:collect beacon data;
-end group
-endwhile
--[hidden]->
-kill
-split again
-while (each 500ms)
-group loop {
-:allign beacon data as ballots;
-:qualify ballots for a vote;
-:conclude vote result;
-:act on vote result;
-end group
-endwhile
--[hidden]->
-kill
-@enduml